|
Do it yourself
| |||
| ||||
How to Replace the Cabin Air Filter on a Fiat 500
Model: Fiat 500
312
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
Replacing the cabin air filter on a Fiat 500 is a straightforward task. Although components may vary in some models, the steps to follow will be largely the same. First, remove the plastic panel located between the passenger footwell and the centre tunnel. This panel is identifiable by the presence of two air vents and can be detached by unscrewing the visible screw between the two vents. Once the screw is removed, the panel should come away easily. Next, proceed to remove the soundproofing panel located under the glove compartment, which is secured with three plastic nuts that can be unscrewed for removal. After taking off the soundproofing panel, you will gain access to the compartment housing the cabin air filter, which is located behind the centre console and identifiable by a rectangular cover secured with two visible screws. Unscrew the two screws, and the cover should come away easily, allowing access to the cabin air filter, which can then be extracted and replaced with a new one. Finally, reassemble everything in the reverse order of disassembly.
Updated on 19 March 2026 by ScegliAuto
Related tutorials
Fiat 500
(2007-2024 /
312)
This video shows how to remove the cabin air filter on a Fiat 500. The cabin filter is located at the bottom left of the glove compartment. Using a p…
Fiat 500
(2007-2021 /
312)
Before you begin, enter the cabin of your Fiat 500. Start by unscrewing the screw that secures the cover near the cabin air filter, then remove the c…
Fiat 500
(2012-2023 /
500 L)
Do you want to replace the cabin air filter on the Fiat 500L? Here’s how to remove the filter from the glove compartment. Open the front glove box, u…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.092
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |