Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement on Fiat Grande Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Engine oil

To replace the oil on a Fiat Grande Punto, follow these steps. Lift the car on a jack and remove the bolt from the oil sump; allow the fluid to drain into a container. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket spanner, unscrew the large securing bolt of the container cap where the oil filter is located. Remove the worn oil filter and install a new one. Lower the car and top up with new oil, then close the front bonnet.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …
Diesel Filter Replacement for Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replace the diesel filter on a Fiat Grande Punto. Lift the front bonnet and locate the diesel filter (as shown in the video). Use a socket spanner to…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos