Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Disc Brake Replacement on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Brake rotors

Replacing the rear disc brake on a Fiat Bravo. Replace the disc brake by disassembling the various parts. Lift the car to a comfortable height for working. Unscrew the bolts with a socket spanner and remove the wheel, then unscrew the bolts of the brake caliper. Use a screwdriver to detach the brake pads, remove the caliper support, and unscrew the bolts on the brake disc (using a Torx screwdriver), then pull the disc towards you to remove it from the hub. Apply grease to the bolts and prepare all parts for reassembly. Fit the brake disc with all the associated bolts, tighten the caliper support to the disc and the pads, then mount the brake caliper. Refit the wheel onto the hub.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Disc on a Fiat Bravo
How to Replace the Brake Disc on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let's see how to remove the front brake disc on a Fiat Bravo. Position your car on a column lift, raising it to a comfortable height; unscrew the bol…
How to Remove the Handbrake Flange on a Fiat Bravo
How to Remove the Handbrake Flange on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you begin, sit in the driver's seat of your Fiat Bravo and fully disengage the handbrake. Using a flathead screwdriver as a lever, start to un…
How to Remove the Rear Light of a Fiat Bravo
How to Remove the Rear Light of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you can start, open the boot of your Fiat Bravo. This will expose the screws that secure the rear light to the car. Begin by unscrewing and re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos