Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Disassembly of the front bumper Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Front bumper
Operation: Disassembly of the front bumper Fiat 500

In this video tutorial we will see how to disassemble the front bumper of a Fiat 500. First we are going to disassemble the rear wheel as a matter of simplicity so that we can remove the fender screws that hold our bumper, as shown in the video. Then open the bonnet and remove the other upper screws of the bumper: at this point we try to unhook our bumper very gently as we will have to unhook it from the rear supports and from the headlights. If you want to leverage to help you remember to do it with specific plastic tools so as not to damage the paint!


Posted on 15 December 2023 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos