Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Removal of the front bumper on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Front bumper
Operation: Removal of the front bumper on Fiat 500

To disassemble the front bumper, remove the fixing clips and the bolts placed in the two wheel arches and which fix the bumper in these areas (maybe turn the wheels to access them more easily). At this point unscrew the bolts below the same and well shown in the video (here you can lift the vehicle with a jack). Finally, unscrew the fixing bolts that secure it in the upper part, therefore from the engine compartment area. Obviously proceed backwards when you dedicate yourself to reassembly. In case you need it, in the tutorial you can also see how to access the bulb mounted in the bumper itself.


Posted on 7 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos