Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard Bulbs on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Light bulb

Are the bulbs for the air control knobs blown? Let's see how to remove the air control knobs on the Panda. Disconnect the air conditioning control frames on the sides (levering them off), then pull the parts from the instrument panel as shown in the video. Be careful not to break the plastic tabs that hold the cover in place. Remove the ventilation knobs from above the dashboard. Replace the bulbs or LEDs with new ones. Refit the knobs above the dashboard cover. Install the plastic cover over the dashboard by pushing it down.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Climate Control Knobs on Panda
Remove the Climate Control Knobs on Panda
Fiat Panda (2012-2026 / 319, MK 3) Remove the climate control knobs from the Fiat Panda? Remove the knobs if you need to replace them or the bulbs inside. Locate the panel with the ven…
Replacing the Dashboard Instrument Cluster Bulbs on the Fiat Panda
Replacing the Dashboard Instrument Cluster Bulbs on the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) In this video tutorial, you will see the main instructions for replacing the dashboard instrument cluster bulbs on the Fiat Panda. First, get inside …
Replace Headlight Bulbs on a Fiat Panda
Replace Headlight Bulbs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the headlight bulbs on your Panda damaged? Not lighting up anymore? Here's how to change them. Open the bonnet by pulling the lever located at th…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos