Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster from the Dashboard

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Dashboard

See other generations:
This video is currently unavailable

Removing the instrument cluster from the dashboard is a seemingly simple task but must be done with great care to avoid damage. Using a screwdriver, unscrew the screws located under the plastic cover on the back of the steering column.

Preferably, use a plastic tool to avoid marking the bodywork and lever in the appropriate notches to disengage the retaining springs of the visor above the instrument cluster. With force but also great caution, pull the entire instrument cluster block outward while being mindful of the connected cables.

Disconnect both rear connections to free the instruments, then remove the instruments. To reassemble, follow the same steps in reverse.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster of a Fiat Punto
How to Remove the Instrument Cluster of a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) How do you remove the instrument cluster of a Fiat Punto? Follow these steps to disassemble the parts: unscrew the screws in the plastic covers of th…
Removing the Dashboard of a Fiat Punto
Removing the Dashboard of a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will see how to remove the instrument panel of a third-generation Fiat Punto. First, get inside the vehicle and start by …
How to Remove the Dashboard of the Fiat Grande Punto EVO
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide shows how to remove the dashboard of the Fiat Grande Punto EVO. The first step is to remove the driver’s side airbag and the steering whee…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos