Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Front Headlight Bulb of Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

In the following tutorial video, you will see how to dismantle and replace the front headlight bulb of a Fiat 500. First, open the car's bonnet: then remove the plastic protective cap of the headlight and disconnect the electrical connector of the bulb. Next, unclip the metal spring and remove the old bulb. Now, fit the new one: in the video, a LED bulb is installed which may require some modifications during the installation phase. For the rest, apply the reverse procedure!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Headlamp Bulb on Fiat 500L
Removing Front Headlamp Bulb on Fiat 500L
Fiat 500 (2012-2023 / 500 L) Remove the front headlamp bulb on the Fiat 500L. Open the bonnet by pulling the lever located at the bottom right of the dashboard. Locate the inspec…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Changing the Front Headlight Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) Do you want to change the front headlight bulbs on a Fiat 500? Follow these steps for the replacement. Open the bonnet by pulling the lever located a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos