Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Diesel Filter on Fiat Doblo, Opel, 1.3 MultiJet

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Diesel fuel filter

In this tutorial video, you will learn how to replace the diesel filter on a Fiat Doblo and all models powered by the 1.3 MultiJet engine. First, open the bonnet of the car and remove the bolt of the diesel filter bracket using a spanner: then disconnect the electrical connector of the filter and proceed to disconnect the inlet pipes, removing them from the guides. Now you can lift out the old filter and replace it with the new one; before refitting everything, it is advisable to check the condition of the diesel pipes (replace them if damaged). Follow the video to the end!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Timing Belt on a Fiat Doblo 1.6 MultiJet
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today, in this brief guide, you will find the main instructions for removing and replacing the timing belt on a second series Fiat Doblo with a 1.6 M…
How to Change the Timing Belt on Fiat Doblò 1.9 MultiJet
How to Change the Timing Belt on Fiat Doblò 1.9 MultiJet
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In this video tutorial, you will see how to remove and replace the timing belt on a Fiat Doblò 1.9 MultiJet, following the instructions below. First,…
Replacing the Auxiliary Belt on a Fiat Doblò 1.3 MultiJet
Replacing the Auxiliary Belt on a Fiat Doblò 1.3 MultiJet
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In this video tutorial, you will learn how to remove and replace the auxiliary belt on a Fiat Doblò 1.3 MultiJet. First, lift the vehicle and remove …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos