Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Front Bumper on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Front bumper

In this video tutorial, you will learn how to remove the front bumper from a Fiat 500. First, unscrew the Torx screws found on the wheel arches; then unclip the bumper from the sides and subsequently unscrew all the screws located underneath the bumper. At this point, you can remove the splash shield if desired. Open the bonnet and, using a Torx T30 key, unscrew all the upper screws of the bumper; start to unclip it gently, possibly using levers, and then remove it completely from the car, as illustrated in the video tutorial!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of a Fiat 500
Removing the Front Bumper of a Fiat 500
Fiat 500 (2007-2024 / 312) In this video, see how to remove the front bumper of a Fiat 500. Lift the bonnet and secure it. Using a battery-powered screwdriver, undo the securin…
How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
Removing the Plastics from the Bumper of the Fiat 500
Removing the Plastics from the Bumper of the Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the front bumper of the Fiat 500 to replace it or to take off the parts. Lift the bonnet and secure it, raise the car on a jack to acce…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos