Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster of a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Instrument cluster

Before you can start, sit in the driver's seat of your Fiat Ducato. Begin by unscrewing the screws that secure the instrument cluster to the dashboard. Once done, remove the upper cover of the instrument cluster. This will give you access to the back of the instrument cluster. Next, unclip and disconnect the relevant connector. After that, unscrew and remove the remaining screws. Once you complete this step, you will have freed the instrument cluster, and you can remove it. When you finish this step, you will have successfully disassembled it.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Ducato?
How to Reset the Service Light on a Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To reset the Service light on a Fiat Ducato, press the accelerator pedal while the instrument cluster is off. Then, turn the key to switch on the ins…
How do you remove the dashboard of a 1999 Fiat Ducato?
How do you remove the dashboard of a 1999 Fiat Ducato?
Fiat Ducato (1993-2016 / MK 2) The need to disassemble the dashboard of a vehicle arises for various reasons, such as issues with the air conditioning controls, electrical wiring s…
Guide to Replacing the Heating Radiator on a Fiat Ducato 2.8 TD
Guide to Replacing the Heating Radiator on a Fiat Ducato 2.8 TD
Fiat Ducato (1993-2016 / MK 2) This guide provides the main instructions for removing and replacing the cabin heating radiator on a Fiat Ducato 2.8 TD. First, open the bonnet of yo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos