Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Lock Module on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Door lock

In this video, follow the instructions to remove the door lock module from a Fiat 500 by following these simple steps. First, open the front door and remove the door panel by taking off the plastic covers located on the panel and unscrewing the Torx screws found underneath, as illustrated in the video; once the panel is removed, disconnect the handle cable and the electrical connector at the back. At this point, remove the inner lining and take out the glass by disconnecting the fixing pin; finally, unscrew the lock screws and disconnect the connector, as shown in the video!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Airbag Control Module in a Fiat 500?
Where is the Airbag Control Module in a Fiat 500?
Fiat 500 (2007-2022 / 312) In this video, see where the airbag control module is located in a Fiat 500, useful if you need to replace it. As shown, it is located inside the cab…
Removing the Door Panel of a Fiat 500
Removing the Door Panel of a Fiat 500
Fiat 500 (1957-1975 / Epoca) Removing the door panel of a Fiat 500 (old model). Use a screwdriver to unscrew the securing screws located in the handle, remove the window winder a…
How to Remove the Door Panel of a Fiat 500
How to Remove the Door Panel of a Fiat 500
Fiat 500 (2007-2021 / 312) Before you start, open the door of your Fiat 500. Begin by prising off and removing the frame of the internal door handle. Next, remove the inserts f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos