Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Airbag Control Module in a Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Airbag

In this video, see where the airbag control module is located in a Fiat 500, useful if you need to replace it. As shown, it is located inside the cabin, specifically under the dashboard on the passenger side. To access it, remove the panel at the joint between the dashboard and the central tunnel by taking out the single screw. The module is situated on the vehicle floor, in front of the bulkhead of the engine compartment. To proceed with the removal, simply disconnect the connectors and unscrew the various fixing bolts.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Blue&Me Module Located on a Fiat 500?
Where is the Blue&Me Module Located on a Fiat 500?
Fiat 500 (2007-2022 / 312) Blue & Me is the commercial name for Fiat's multimedia car entertainment system. It is the control unit that manages the Bluetooth hands-free, USB so…
How to Identify the Fuse Box on the New Fiat 500.
How to Identify the Fuse Box on the New Fiat 500.
Fiat 500 (2014-2022 / 500 X) In this video tutorial, you can see how to identify the fuse box on the new Fiat 500 by following simple steps that will guide you to proper vehicle …
Where to Find the Bluetooth Module on the Fiat 500
Where to Find the Bluetooth Module on the Fiat 500
Fiat 500 (2007-2024 / 312) On the Fiat 500, whether petrol or diesel, the Bluetooth module is not located in a fixed place but depends on the type of system fitted to your car.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos