Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Compartment from the Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

How to remove the dashboard of the Grande Punto and replace the air filter? Enter the vehicle and identify the plastics to be removed to access the air filter. Detach the trim located inside the dashboard, obtain a screwdriver or a cordless drill, remove the covering plastic from inside the dashboard, then extract the worn cabin filter.

Insert a new cabin filter, ensuring it fits snugly around the walls of the box, reassemble the cover inside the glove compartment and tighten the screws. Check the correct installation of the previously mounted parts in the glove compartment.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Removing the Glove Compartment of the Grande Punto
Removing the Glove Compartment of the Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the glove compartment of a Fiat Grande Punto? Enter the car's interior and see how to dismantle the parts. Open the glove compartment a…
How to Remove the Glove Compartment from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, we will see in this video how to remove and replace the glove compartment of the Fiat Grande Punto, following the instructions below. First, g…
Removing Fuses from Grande Punto
Removing Fuses from Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the fuses from the Fiat Grande Punto? The fuses are located in the engine bay or in the car's cabin. Use a plastic lever to remove the …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos