Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Time on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Instrument cluster

See other generations:
Video tutorial

Turn on the instrument cluster but do not start the engine. Press the "set" button located on the central dashboard, as shown in the video.

By pressing this button, you will enter the menu of your Fiat Panda's instrument cluster. Scroll up and down using the arrows until you reach the "set time" page.

Once here, press the "set" button twice more to enter the page, then the time will start to flash. Use the "up" and "down" arrows to adjust the time and confirm using the "set" button again.

Exit and check that the time you set has been saved. Turn off and on the ignition for further verification.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) Adjusting the time on a Fiat Panda is a very simple task, and by following this video, you will have no problem setting the correct time on your Fiat…
Adjusting the Clock on a Fiat Panda
Adjusting the Clock on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) To adjust the time on the latest Fiat Panda model, proceed as follows: to the right of the dashboard, press the set button (with the dashboard on); a…
How to Set the Clock on the New Fiat Panda
How to Set the Clock on the New Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) To adjust the clock on this new model from the Turin manufacturer, use the SET button and the buttons immediately to the right and left of it, locate…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How do you access the on-board menu of the Fiat Panda? Read answer

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos