Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Throttle Body from a Fiat Punto 1.2

Model: Fiat Punto MK 2, 188 - Years 1999-2011

Before starting, open the front bonnet of your Fiat Punto 1.2. Begin by removing the air filter housing and the associated hoses by unscrewing the relevant screws and clamps. Next, remove and relocate the component positioned above the throttle body and its supporting bracket by unscrewing the relevant nuts and screws. This will give you access to the throttle body. Proceed to disconnect the electrical connectors, then unscrew the fastening screw. At this point, you can extract and remove the throttle body from the engine bay, completing the removal process.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Clean the Throttle Body on Fiat Grande Punto 1.4 Petrol
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will learn how to remove and clean the throttle body on a Fiat Grande Punto 1.4 Petrol. First, open the bonnet of your ca…
Removing the Throttle Body from a Fiat Punto 1.2 8V
Removing the Throttle Body from a Fiat Punto 1.2 8V
Fiat Punto (1999-2011 / MK 2, 188) .. In this video tutorial, you will see how to remove the throttle body from a Fiat Punto 1.2 8 valve. First, open and lift the bonnet; then.. …
How to Remove the Throttle Body on a Fiat Punto?
How to Remove the Throttle Body on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) In this tutorial, you will learn how to remove the throttle body on a Fiat Punto MK2, a very simple and quick operation. First, ensure the engine is …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos