Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instrument Cluster Disassembly Instructions

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Dashboard

See other generations:
Video tutorial

Disassembling the instrument cluster is a fairly simple operation: the first step is to remove the plastic trim surrounding the instrument cluster; it is secured with four Allen screws, two along the top edge and two just below the steering wheel. Once the trim is removed, lower the steering wheel fully to facilitate the extraction of the cluster, which is secured with three Allen screws: one at the centre above and two positioned at the sides below.

At this point, pull the instrument cluster forward and disconnect the corresponding connector by releasing the bayonet lock. To complete the disassembly, unclip the plastic tabs of the rear cover and remove it if necessary.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing Injectors from a Fiat Grande Punto 1.3 MultiJet
Instructions for Removing Injectors from a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see instructions on how to remove the injectors from a Fiat Grande Punto powered by a 1.3 MultiJet engine. First, op…
Instructions for Removing the Radiator
Instructions for Removing the Radiator
Fiat Punto (1993-1999 / MK 1, 176) Removing the cooling fan and the radiator is very straightforward; it is recommended to perform this operation with a cold engine, as the first step …
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This brief guide outlines the main steps to remove and replace the clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First, open the bon…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos