Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Radiator

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Radiator

Removing the cooling fan and the radiator is very straightforward; it is recommended to perform this operation with a cold engine, as the first step is to drain the coolant; once done, disconnect the inlet and outlet hoses, the temperature sensor connections, and the power supply to the fan motor; proceed to remove the fixing screws of the plastic frame that supports the fan and take it out from behind the radiator, and finally, slide out the radiator itself along with the expansion tank.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Heating Radiator on a Fiat Grande Punto
Replacing the Heating Radiator on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Is the heating radiator on your Fiat damaged? Let's look at removing the radiator located inside the Fiat cabin. Open the door and locate the heating…
Radiator Fan Removal Instructions
Radiator Fan Removal Instructions
Fiat Punto (1999-2011 / MK 2, 188) The radiator cooling fan is fixed to the radiator itself via a plastic support frame. The first pin to remove is located right at the centre, beneath…
Guide to replacing the heater radiator of the Fiat Punto cabin
Guide to replacing the heater radiator of the Fiat Punto cabin
Fiat Punto (1999-2011 / MK 2, 188) Let's briefly see the main instructions useful for disassembling and replacing the heating radiator of the Fiat Punto's cabin. First of all, get on b…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where do you put the coolant in the Fiat Punto? Read answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto radiator fluid reservoir located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos