Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the heater radiator of the Fiat Punto cabin

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Heater core

Let's briefly see the main instructions useful for disassembling and replacing the heating radiator of the Fiat Punto's cabin. First of all, get on board the car and start disassembling the entire dashboard; to do this, you will need to remove the glove compartment and the entire central instrumentation (radio and air conditioning controls), unscrewing the screws and disconnecting the various electrical wiring. At this point, we find the radiator at the bottom on the passenger side, disconnecting the two inlet and outlet pipes of the fluid to remove it and replace it with the new one!

Posted on 28 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Heater Radiator of the Fiat Punto
Removing the Cabin Heater Radiator of the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide will cover the main steps to remove and replace the cabin heater radiator of the Fiat Grande Punto, as well as the Punto Evo. Before remov…
Replacement of the heater radiator of the Fiat Punto cabin
Replacement of the heater radiator of the Fiat Punto cabin
Fiat Punto (1999-2011 / MK 2, 188) Today we will see the instructions that will allow us to disassemble and replace the heater radiator of the Fiat Punto. In order to access the heater…
Guide to Replacing the Heating Radiator on the Fiat Punto
Guide to Replacing the Heating Radiator on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Below are the main instructions for removing and replacing the heating radiator in the Fiat Punto's cabin. First, get inside the vehicle and begin by…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos