Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Fiat Fiorino

Model: Fiat Fiorino MK 3 - Years 2007-2026
Part: Service warning light

In this short video tutorial, you will learn how to reset the service light for the regular maintenance oil change on a second series Fiat Fiorino. First, get inside the car and turn the ignition on by turning the key; then press and hold the accelerator pedal while pressing the brake pedal seven times, as shown in the video. At this point, you will see the warning light flash, then turn off the ignition; now start the engine and check that the maintenance light has reset successfully!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Warning Light on a Fiat Fiorino
Resetting the Service Warning Light on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) In this brief guide, you will find instructions to reset the service light for regular maintenance on a Fiat Fiorino. First, get in the vehicle and p…
How do you reset the Service light on the Fiat Fiorino?
How do you reset the Service light on the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) In order to reset the Service light of the Fiat Fiorino, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found…
How to reset the service light in a Fiat Fiorino.
How to reset the service light in a Fiat Fiorino.
Fiat Fiorino (1988-2014 / MK 2) In this video tutorial, the steps to reset the service light of a Fiat Fiorino vehicle are explained. Get inside the car, insert the key into the ign…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos