Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling Key for Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Key

See other generations:
Video tutorial

In this video tutorial, you will see the main steps to disassemble the key and replace the shell of a Fiat Punto. First, remove the rear cover of the remote by prying it open with something thin, and also take out the battery compartment along with the battery.

Next, unscrew the screw located behind the remote and open it into two parts, thus removing the electronic board, chip, and ignition key, saving all components that need to be transferred to the new remote shell; follow the video until the end!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Change the Battery of a Fiat Punto Remote
How to Change the Battery of a Fiat Punto Remote
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Changing the battery of the key or remote of a Punto? Here's how to disassemble the Fiat remote. Take the remote and unscrew the screw located at the…
Replacing the Remote Battery for the Fiat Punto Evo
Replacing the Remote Battery for the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief and simple guide, you will find step-by-step instructions to dismantle and replace the battery in the key remote for the Fiat Punto Evo…
How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos