|
Do it yourself
| |||
| ||||
How to reset the "Service" warning light on a Fiat Ducato
Model: Fiat Ducato
X250
- Years 2006-2014
Let's start by sitting on the driver's seat of our Fiat Ducato. After that, we will have to activate the instrument panel, but without starting the engine, by turning the key to position one. Once this is done, we will have to press and hold the right button in the instrument panel for ten seconds, until "CFG 1" appears in the multifunction display. Next, we will have to press and hold the button again for five seconds, and finally we will have to release it and turn off the instrument cluster. When we have completed this last step, when we go to reactivate the instrument panel, the "Service" warning light will no longer be present, and the reset will be completed.
Posted on 20 July 2021 by ScegliAuto
Video tutorial
Related tutorials
Fiat Ducato
(2006-2014 /
X250)
The operation of resetting the Service light on the Fiat Ducato is done by inserting the ignition key into the appropriate slot, so that it can be tu…
Fiat Ducato
(2006-2014 /
X250)
On the Ducato, the Service light reset operation is performed by inserting the ignition key into the appropriate slot and turning it to start the ins…
Fiat Ducato
(2014-2024 /
X290)
To reset the Service light of the Fiat Ducato, you need to connect a diagnostic tool to the OBD port of the vehicle: this port will be located on the…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Timing Belt on a Chevrolet Matiz
How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.115
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
