Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiring Integrity Check and Restoration

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

Contact with hot engine components can over time damage the corrugated covering that protects some wiring, exposing the electrical cables to a risk of breakage: it is therefore advisable during routine maintenance to check the wiring for integrity. If any protective corrugated covering is found to be damaged, check the integrity of the cables and then wrap the affected area with cloth tape rather than insulating tape, as it has superior adhesive properties and better resistance.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Resetting the Inertia Switch on a Fiat Grande Punto
Resetting the Inertia Switch on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The inertia switch is a device introduced in cars to stop the fuel flow in case of an accident, preventing potential fires. Conceptually, it consists…
Fuse Diagram (Air Conditioning) Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If the air conditioning does not activate (the compressor does not start or the electromagnetic clutch of the pulley does not engage), the first thin…
How to change the air filter in the Fiat Punto
How to change the air filter in the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To replace the engine air filter on the Fiat Punto, work with the engine cold and the car on level ground. Open the hood from the cabin and secure it…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos