Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan on Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Blower motor

See other generations:
Video tutorial

Disconnect the battery before starting. The fan is located near the pedal area, in a rather awkward position, so you will need to remove the lower cover near the pedal area.

Disconnect the fan connector, then using a 5.5 mm hex key, unscrew the single screw that secures the fan. Now, by turning it to the right, the fan will come out of its housing. Fit the new fan into its housing and turn it to the left until it stops.

Using the same hex key, screw in the previously removed fastening screw. Refit the cover.

If the fan still does not work, it means the resistor also needs to be replaced.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan from a Fiat Panda 169
Removing the Cabin Fan from a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will see how to remove the cabin fan from a Fiat Panda 169. First, get inside the car and remove the plastic side panel n…
How to Remove the Heating Fan from a Fiat Panda
How to Remove the Heating Fan from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The heating fan in a Fiat Panda is located above the pedals. Before you can begin, you need to remove the relevant cover. Start by disconnecting the …
How to Replace the Cabin Fan Fuse on a Fiat Panda
How to Replace the Cabin Fan Fuse on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the front bonnet of your Fiat Panda. The cabin fan fuse is located inside the fuse box. The fuse box is situated within the en…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos