Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the rear seats on the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Seat
Operation: How to remove the rear seats on the Fiat 500

We see in this video the instructions that will allow us to remove the rear seats on the Fiat 500 312, following these simple steps. First we open the boot lid and begin by reclining the rear seat; then we go to unscrew all the fixing screws that we find on the sides, using a socket wrench, as shown in the video. At this point we first remove the backrests; then let's unscrew the screws of the rear sofa, which we find at the bottom. We just have to remove everything, following the video tutorial to the end!


Posted on 21 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 1957-1975 - How much do the seats of a vintage Fiat 500 cost? Read Answer
    • 500 2014-2022 - Why does the lumbar adjustment of the seat on the Fiat 500X not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos