Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the Fiat 500 turn signal light bulb?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Light bulb
Operation: How to replace the Fiat 500 turn signal light bulb?

In order to replace the Fiat 500 turn signal bulbs, the wheels must be rotated on the opposite side from that of the bulb to be replaced. Once the wheels have been turned, it will be necessary to access the wheel arch and remove the protective cap located at the rear of the bulb. This will then have to be extracted from its housing and unhooked from its connector. Once the old bulb has been removed, the new one will need to be connected to the connector and inserted into its housing. Finally, it will therefore be possible to insert the protective cap again.


Posted on 2 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - How do you replace the parking light bulb on the Fiat 500? Read Answer
    • 500 2007-2022 - How to replace a position light on Fiat 500? Read Answer
    • 500 2012-2023 - How to change the reverse light bulb on the Fiat 500? Read Answer
    • 500 2007-2022 - How much do the position and running lights of the Fiat 500 cost? Read Answer
    • 500 2012-2023 - How to replace the headlight bulb in the 2013 Fiat 500 L? Read Answer
    • 500 2012-2023 - How much do Osram bulbs cost for the low beams of the Fiat 500 L? Read Answer
    • 500 2012-2023 - What sidelights are needed for the Fiat 500 L? Read Answer
    • 500 2012-2023 - Which bulbs to use for the rear position lights of the Fiat 500? Read Answer
    • 500 2012-2023 - How to install led sidelights in the Fiat 500L? Read Answer
    • 500 2012-2023 - How to replace the sidelights in the Fiat 500L? Read Answer
    • 500 2007-2021 - Where is the front position light bulb of the Fiat 500? Read Answer
    • 500 2012-2023 - How to replace the license plate light bulb in Fiat 500L? Read Answer
    • 500 2007-2021 - How to replace the sidelights in the Fiat 500? Read Answer
    • 500 2014-2022 - What sidelights are fitted on the Fiat 500X? Read Answer
    • 500 2007-2023 - What type of position light bulb is fitted on the Fiat 500? Read Answer
    • 500 2007-2023 - How to eliminate the light failure warning light in the Fiat 500? Read Answer
    • 500 2007-2023 - Which bulbs do I need for the position lights of my Fiat 500 Abarth? Read Answer
    • 500 2014-2022 - What does the warning light with yellow triangle mean on the Fiat 500? Read Answer
    • 500 2014-2022 - How to open the door of the daytime running lights in the Fiat 500X? Read Answer
    • 500 2007-2023 - What bulbs are used on the Fiat 500 (312)? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos