Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement of the Fiat 500 daylight lamp.

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2012-2021
Part: Headlight bulb
Operation: Replacement of the Fiat 500 daylight lamp.

In case the control system of the Fiat 500 warns us that the daytime running light bulb has burned out, it needs to be replaced as soon as possible. To access the spotlight, you need to remove a small door located in the wheel arch; to do this more easily, turn the front wheel inward. Once the door is open, we can remove the rubber cap and slide out the bulb holder, remove the burnt bulb, and replace it with a new one. We then place the bulb holder back into its housing, position the protective cap, and before closing the wheel arch door with its clips, we test the correctness of the operation.


Posted on 22 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - Where are the front fog lights of the Fiat 500 mounted? Read Answer
    • 500 2012-2023 - Which dipped beam bulbs are fitted on the Fiat 500L? Read Answer
    • 500 2007-2022 - Why are the daytime running lights of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - The position lights of my Fiat 500 are not working, what can I do? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb in the vintage Fiat 500L? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb on a Fiat 500? Read Answer
    • 500 2012-2023 - How to replace the parking light on a Fiat 500X? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos