Do it yourself
Frequently asked questions about cars and motorcycles

Checking and replacing the fuses on Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Punto EVO, Grandepunto - Years 2005-2018
Part: Fuse box

To investigate whether a fuse may be blown, we can refer to a diagram that Fiat makes available (See vehicle booklet). To do this, you need to unscrew two screws which are used to keep the fuse door in place; or just pull the handle and remove the door. The fuses can be found in different areas of the vehicle: near the steering wheel, engine compartment control unit; or in some versions of the Fiat Punto, they can also be found in the trunk of the car. The fuses are numbered according to the diagram. The fuses can be distinguished according to the color: Amber Yellow are 5 Ampere; 7.5 Ampere is brown; 10 Ampere is red; 15 Ampere is blue; 20 Ampere is yellow; 25 Ampere is white; 30 Ampere is green in color.

Posted on 6 October 2021 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In this short and simple guide we will see how to remove and replace the fuses on the Fiat Grande Punto, but also on the Punto Evo, in simple and qui…
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) Replacing the fuses on the Fiat Grande Punto? Let's see where they are. We open the door and enter the passenger compartment, open the glove compartm…
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) The fuses of the Fiat Grande Punto are divided into the two fuse boxes that are present on the car: in this model it is possible to identify the firs…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Grande Punto turn signal relay located? Read answer

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos