Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How do you remove the air filter box from the Fiat Punto?

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Air filter
Operation: How do you remove the air filter box from the Fiat Punto?

In order to remove the Fiat Punto air filter box, the hood must be opened to gain access to the engine compartment. Once the hood has been opened, the box will be easily identifiable: to remove it, it will be necessary to loosen the bolts located on the side parts. Once the bolts have been loosened, it will be possible to disconnect the tubes which are located in the side parts of the box and also in its lower part. Once the box has been cleared of pipes and bolts it can be removed from its housing. To reposition it, you will need to connect it to the pipes and secure it with bolts.


Posted on 5 March 2024 by ScegliAuto



How do you replace the air filter on the Fiat Grande Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to replace the air filter on the Fiat Grande Punto, you need to open the bonnet, so that you have access to the components inside the engine
How to replace the air filter on a Fiat Grande Punto 1.2 8V
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to replace the air filter, we first need to open the engine hood and remove the filter box. To do this we must unscrew the two bolts on the
How to replace the air filter on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) To be able to replace the air filter on the engine of your Fiat Grande Punto correctly and safely, you just need to put into practice the following s

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos