Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Airbag on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Airbag

Want to remove the steering wheel airbag from the Fiat 500? Enter the cabin and see how to dismantle the airbag. Disconnect the battery terminals, then remove the plastic covers under the steering wheel. Insert the removal keys into the slots at the back of the steering wheel and release the clips until the airbag is free. Once the airbag is detached, disconnect its power connectors and remove it from the steering wheel. Unscrew the nut in the centre, then remove the steering wheel if you wish to take it off. Connect the airbag power connector and press it back onto the steering wheel.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Airbag on Fiat 500
How to Replace Airbag on Fiat 500
Fiat 500 (2007-2021 / 312) How do you remove the airbag from a Fiat 500? Here’s how to take off the airbag from above the steering wheel. Enter the cabin, locate the holes behi…
How to replace the steering wheel airbag of the Fiat 500X
How to replace the steering wheel airbag of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this guide we will see the instructions that will allow us to disassemble and replace the steering wheel airbag of the Fiat 500X. In this case, th…
How to Remove the Airbag from the Steering Wheel of the Fiat 500
How to Remove the Airbag from the Steering Wheel of the Fiat 500
Fiat 500 (2007-2022 / 312) This guide illustrates the procedure for removing the airbag from the steering wheel of the Fiat 500 (and possibly replacing it). Follow these steps:…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos