Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2021
Part: Timing belt

To replace the timing belt on the Fiat 500, open the bonnet to access the engine compartment. Here, you will need to remove the plastic covers located on the left side of the engine to access the pulleys. By also removing some obstructive parts like hoses or connectors, you can unscrew the nut that secures the central pin of the tensioner roller, reducing the tension on the belt itself. Reducing the tension will allow you to slip off the belt and replace it with a new spare part. After installation, you can also fit all the other components.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…
Fiat 500 (2007-2024 / 312) Today we will see the guidelines for replacing the timing belt of the Fiat 500 1.2. First, we open the hood and start disassembling and removing the …
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - When to replace the Abarth 500 timing belt? Read answer
    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos