Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
188, MK 2
- Years 1999-2011 The first operation to carry out is to lift the car on a lift and drain the gearbox oil (the drain plug is located in the rear part of the gearbox itself); then remove the left wheel, then the brake caliper and the head of the swinging arm of the suspension in order to free the hub and also be able to remove the drive shaft: then loosen the nut fixing the drive shaft to the hub and extract it also from the gearbox. Then proceed with the disassembly of the starter motor, the gear cables and the clutch cable; therefore unscrew the pins securing the gearbox to the engine block and the support that connects the gearbox to the car chassis. At this point it is possible to remove the gearbox and access the clutch.
Posted on 22 July 2023 by ScegliAuto
Disassembly of the Fiat Punto gearbox
Fiat Punto (1999-2011 / 188, MK 2) Let's find out in this guide how to disassemble the Fiat Punto gearbox, following the instructions below. First of all, we lift the car and begin to
Disassembly of the gearbox on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this guide we will see the instructions to remove the dual logic gearbox on the Fiat Grande Punto, but also on the Punto Evo. First we lift the ca
How to change the gearbox oil of the Fiat Punto 1.9 JTD
Fiat Punto (1999-2011 / 188, MK 2) We will see below the instructions necessary to change the transmission oil on the Fiat Punto 1.9 JTD. First of all we raise the car and drain the ge Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |