Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the Fiat 600 tappet gasket?

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Checks and maintenance

To replace the Fiat 600 tappet gasket, you need to open the hood to gain access to the engine compartment and loosen the screws that secure the air filter box, removing it completely. At this point it will be possible to loosen the bolts securing the engine top cover and remove it completely. This will show the gasket, which will need to be removed and replaced with a new spare part. Once the new gasket has been installed, the engine top cover and air cleaner housing can be reinstalled.

Posted on 20 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the cables of the coils on Fiat 600
How to disassemble the cables of the coils on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils of our Fiat 600 damaged and the car does not start? Let's see how they are replaced on a Fiat 600. Pull the engine compartment opening …
How to remove the headrest of a Fiat 600
How to remove the headrest of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before we can start we will have to go and sit on the back seat of our Fiat 600. There are small holes in the headrest supports. So let's start by in…
How to top up the washer fluid reservoir of a Fiat 600
How to top up the washer fluid reservoir of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before we can start, we will have to open the front hood of our Fiat 600. Let's start by unscrewing and removing the cap positioned near the right fr…

Other guides you may be interested in

How to Remove the Steering Wheel Airbag on a Dodge Journey

How to remove the steering wheel airbag on a Dodge Journey? Follow these steps. Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps from the back of the steering wheel, then unscrew the airbag retaining bolts with a socket wrench. Once the driver’s airbag is released, disconnect the power connectors and remove the airbag from the steering wheel. For reinstallation: connect the power connectors, then press the airbag back onto the steering wheel while simultaneously tightening the rear bolts.

Watch the video!


by ScegliAuto

More videos