Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing brake pads and discs on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

Remove the wheel cover of the affected wheel and loosen the wheel bolts. Lift the car with a jack and secure it safely.

Completely unscrew the previously loosened bolts and remove the wheel from its hub. If you are working on the front right wheel, turn the steering to the right for better access to the caliper; otherwise, turn it the other way. Using a suitable tool, remove the pin from the caliper pin and then remove the pin itself.

At this point, you can extract the brake pads and replace them.

Continue following the tutorial for the removal of the discs.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Replacing Rear Brake Discs and Pads on a Fiat 500
Replacing Rear Brake Discs and Pads on a Fiat 500
Fiat 500 (2007-2021 / 312) In today’s video tutorial, you will find all the instructions and steps to disassemble and replace the rear brake discs and pads on a Fiat 500. First…
Replacing Brake Pads
Replacing Brake Pads
Fiat 500 (2007-2024 / 312) Replacing the front brake pads is relatively straightforward. The necessary tools are: a half-inch ratchet with 13, 17, and 19 mm hex sockets; an adj…
How do you replace the rear brake pads of the Fiat 500?
How do you replace the rear brake pads of the Fiat 500?
Fiat 500 (2007-2023 / ) In order to replace the rear brake shoes of the Fiat 500, you need to lift the car so that the rear wheels are not in contact with the ground: once t…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos