Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the window glass on the Fiat 500 Abarth

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Side window
Operation: How to replace the window glass on the Fiat 500 Abarth

Let's find out in this video how to remove and replace the glass of the side window, on the driver's side, on the Abarth 500, but also on the Fiat 500. First we open the front door and start by removing the door panel; to do this, unscrew the fixing screws on the handle and on the sides, disconnecting the electrical connector of the push-button panel and the cable of the handle. Once removed, we can unscrew the screws of the glass brackets in order to remove it upwards, as shown in the video; we just have to insert the new window gently, following the video to the end!


Posted on 17 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2021 - Why does the Fiat 500 window lifter not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos