Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the spark plugs on the Fiat 500X?

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Spark plugs
Operation: How do you replace the spark plugs on the Fiat 500X?

To be able to replace the spark plugs on the Fiat 500X, you need to open the hood to access the engine compartment and remove the plastic cover from the top of the engine. This will allow you to remove the bolts that secure the coils to their housing and move them, allowing access to the spark plug housing. These must be extracted using the appropriate socket wrench to unscrew and extract them from their housing. Once the old spark plugs have been removed, it will be possible to insert new spare parts and connect them to the appropriate coils, covering everything with the appropriate cover.


Posted on 18 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How do you replace the spark plugs of the Fiat 500L? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 spark plugs? Read Answer
    • 500 2007-2021 - Where are the spark plugs of the Fiat 500 1.3 MultiJet located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos