Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Light Bulb on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2021
Part: Light bulb

Replacing the boot light bulb on a Fiat 500 is an extremely simple and quick operation; let's see how to proceed in the attached video tutorial. Obtain a replacement bulb, in this case, an LED type, and a flat-head screwdriver. Go to the boot and use the screwdriver tip to unlock the light cover, pull it out of its housing and disconnect the connector. As shown in the video, move the white plastic cover downwards to free the bulb, replace it and reassemble everything by following the reverse procedure.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adapt the Boot of a Fiat 500X for a Space Saver Wheel
How to Adapt the Boot of a Fiat 500X for a Space Saver Wheel
Fiat 500 (2014-2022 / 500 X) Let’s see how to adapt a Fiat 500X boot for a space saver wheel, which it was not originally designed for. You need to excavate the boot to fit the s…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Fog Light Bulb on a Fiat 500 X
How to Replace the Fog Light Bulb on a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the fog light bulb on a Fiat 500 X is a very simple task that can be done independently. Start by removing the wheel arch liner on the side…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos