Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen on a Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Windshield

See other generations:
Video tutorial

Start by removing the front wipers using a flathead screwdriver to lever them off. Next, remove the broken windscreen by pushing from the back seats with your feet. By doing this, you will have removed the windscreen.

Proceed to remove the seal from the broken windscreen, which you will reuse for the new windscreen. To fit the new windscreen, first attach the seal previously removed from the old windscreen.

Once done, insert a string around the entire perimeter of the seal, then place the windscreen into its housing. Once inserted, pull and gradually remove the end of the string sticking out from the outside.

Once this step is completed, you will have successfully finished the replacement and can refit the wipers.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen on a Fiat 500L
How to Replace the Windscreen on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) To replace the windscreen on a Fiat 500L, open the bonnet to access the bolts securing the plastic grille located just below the windscreen. Once thi…
How to Replace the Windscreen on a Fiat 500
How to Replace the Windscreen on a Fiat 500
Fiat 500 (2007-2024 / 312) Is the windscreen of your car cracked? Follow these steps to remove and replace the windscreen of a Fiat 500. First, open the bonnet and remove the p…
Fitting Windscreen on Fiat 500
Fitting Windscreen on Fiat 500
Fiat 500 (2007-2021 / 312) In this video tutorial, you will learn how to fit the front windscreen on a Fiat 500 by following these important instructions. First, ensure that th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos