Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the H4 Fuses for the Front Headlights of the Fiat Panda 169

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Headlight

See other generations:
Video tutorial

The video demonstrates how to easily replace the H4 fuses, worn out by the heat produced by the halogen lamps, of the front headlights of the Fiat Panda 169. Remove the cover, detach the two retaining clips, and then remove the halogen bulb. After disconnecting the battery, remove the old fuse and strip all the affected wires, including those of the new fuse.

Insert heat-shrink tubing onto each wire and join each wire of the same colour, sliding the tubing over. Insert the bulb and test the headlights with both high and low beam.

If everything is fine, shrink the tubing with a lighter, replace the bulb in its housing, and secure the fuse with the two retaining clips. Finally, tidy the wires in the headlight and reattach the cover.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Dipped Headlights on a Fiat Panda 169
How to Adjust the Dipped Headlights on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will learn how to adjust the height or angle of the dipped headlights on a Fiat Panda 169. You can make the adjustment in two d…
Replacing the Headlight Bulbs on the Fiat Panda 169
Replacing the Headlight Bulbs on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this short video, you will see how to remove and replace the headlight bulbs on the Fiat Panda 169, second series, following these simple and quic…
Dismantling the Front Headlight on a Fiat Panda 169
Dismantling the Front Headlight on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will learn how to remove the front headlight of a Fiat Panda 169 by following these simple instructions. First, remove the fastening screw…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos