|
Do it yourself
| |||
| ||||
How to deactivate the automatic reset of the Trip B function of the Fiat Tipo
Model: Fiat Tipo
357, 356, 358
- Years 2016-2026
The Trip B function refers to the partial mileage traveled with the car and can be factory set to reset every 2 or 8 hours, but also at every start. To disable the automatic reset just follow these simple instructions. First, make sure you insert the key and turn on the car ignition only. Then navigate through the menu until you find the item "Vehicle Setup". Scroll down and select "Display" and "Reset Trip B". At this point all that remains is to choose the option "Never" (or "Never") and, finally, exit the menu.
Posted on 6 February 2022 by ScegliAuto
This video is currently unavailable
Related tutorials
Fiat Tipo
(2016-2026 /
357, 356, 358)
In this guide, let's see how to activate or deactivate the start&stop function of the Fiat Tipo, following the instructions below. First of all, we g…
Fiat Tipo
(2016-2026 /
357, 356, 358)
The Fiat Brake Control in general, not only related to the Fiat Tipo, consists of managing, through the sensor placed on the front grille, the brakes…
Fiat Tipo
(2016-2026 /
357, 356, 358)
The guide shows how to deactivate the Start & Stop system of the Fiat Tipo sw. The operation is very simple and does not require any specific tools. …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Front Headlight of a Mercedes S-Class
Want to remove the front headlight of a Mercedes S-Class? Let’s see how to proceed with the disassembly in the instructional video. Open the hood by pulling the hood release lever and secure it. Remove the retaining pins on the headlight bar using a socket wrench or battery-powered screwdriver. At this point, you will find additional pins on the lower side of the headlight; unscrew them from the metal brackets. Disconnect the bulb holders from the headlight and remove the headlight from the vehicle body. Install the new headlight with new bulbs if damaged (always use the correct type and size) and insert the headlight into its housing. Finally, tighten the pins on the headlight and test the proper functioning of the lights. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
