Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Gear Shift Lever on the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2021

In this video tutorial, you will learn how to remove and replace the gear shift lever and the housing on the Fiat 500 Abarth, following the instructions below. First, get in the vehicle and start by removing the gaiter and the gear knob; then undo the two screws located on the dashboard plastic, also removing the two side panels found at the bottom, as shown in the video. At this point, use pliers to disengage the gear shift lever mechanism to remove it; simply replace it and reassemble everything, following the video until the end!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Gear Knob on Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In today's tutorial, you will find instructions on how to remove and replace the gear knob on a Fiat 500 Abarth. First, get inside the vehicle and re…
Replacing Gear Knob on Fiat 500 Abarth
Replacing Gear Knob on Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) Today, you will learn how to remove and replace the gear knob on a Fiat 500 Abarth. First, get inside the vehicle. Use a plastic lever or a pointed o…
How to replace the gear knob of the Fiat 500 Abarth
How to replace the gear knob of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Today's main instructions will show us the process of disassembling and replacing the gear shift knob of the Fiat 500 Abarth and Fiat 500. First, we …

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos