Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Croma
    4. : Replacement of the timing belt of the Fiat Croma 1.9 JTD

Fiat Croma - Video tutorial

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Timing belt
Operation: Replacement of the timing belt of the Fiat Croma 1.9 JTD

Let's see in this video how to remove and replace the timing belt of the Fiat Croma, with 1.9 JTD engine. First we open the engine hood and start by disassembling and removing the air filter box, disconnecting the intake sleeve; then we lift the engine from below with a jack, in order to remove the engine support on the distribution side, as shown in the video. At this point we unscrew the screws of the distribution cover, in order to remove it; we then carry out the procedure for replacing the belt, taking all the necessary references!


Posted on 12 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Croma 2005-2010 - How much does it cost to replace the belt on the Fiat Croma? Read Answer
    • Croma 2005-2010 - How much does it cost to change the timing belt on the Fiat croma? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos