Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Black Box/GPS from Insurance on the Fiat 500

Model: Fiat 500 312 - Years 2007-2021

In this tutorial video, learn how to install the black box or GPS provided by the vehicle's insurance agency for the Fiat 500. First, open the bonnet and find a flat position to install the GPS (usually placed above the battery); then clean the mounting surface thoroughly and install the straps for securing it (provided with the adhesive underneath). Now, connect the power to the battery by connecting the black box to the positive and negative terminals.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Octo Telematics GPS on a Fiat 500
How to Install the Octo Telematics GPS on a Fiat 500
Fiat 500 (2007-2021 / ) Car GPS systems are very important accessories that allow you to pinpoint the vehicle's location with extreme accuracy at any time, especially useful…
Where to Find and How to Access the Fuse Box on a Fiat 500
Where to Find and How to Access the Fuse Box on a Fiat 500
Fiat 500 (1957-1975 / Epoca) Hello, today you will learn how to locate and access the fuse box on your Fiat 500. First, carefully open the bonnet by using the release lever insid…
How to Identify the Fuse Box on the New Fiat 500.
How to Identify the Fuse Box on the New Fiat 500.
Fiat 500 (2014-2022 / 500 X) In this video tutorial, you can see how to identify the fuse box on the new Fiat 500 by following simple steps that will guide you to proper vehicle …

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos