Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Octo Telematics GPS on a Fiat 500

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Accessory kit

See other generations:
Video tutorial

Car GPS systems are very important accessories that allow you to pinpoint the vehicle's location with extreme accuracy at any time, especially useful in case of theft. Among the best models currently available is undoubtedly the one produced by the well-known company Octo Telematics.

But how do you install it? Before discovering this, remember that all the following steps should be performed with the engine off for added safety. Lift the front bonnet and remove any dirt accumulation on the battery using the cloth included in the package.

Then, place the GPS on top of the battery and connect it to the two terminals. At this point, the GPS is operational, and all that remains is to close the bonnet.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to install octotelematics in the Fiat 500
How to install octotelematics in the Fiat 500
Fiat 500 (2007-2021 / 312) In this video tutorial, you can see how to install the GPS "OCTO TELEMATICS" by following a few simple steps that will guide you towards proper vehic…
Installing the Black Box/GPS from Insurance on the Fiat 500
Installing the Black Box/GPS from Insurance on the Fiat 500
Fiat 500 (2007-2021 / 312) In this tutorial video, learn how to install the black box or GPS provided by the vehicle's insurance agency for the Fiat 500. First, open the bonnet…
Tow Bar Installation on Fiat 500 L Trekking
Tow Bar Installation on Fiat 500 L Trekking
Fiat 500 (2012-2023 / 500 L) In today's video, you will see how to install a tow bar on a Fiat 500 L, Trekking version. In this case, our vehicle is already prepared for the tow …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos