Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gasket of the rear compass glass on the Fiat Panda?

Model: Fiat Panda MK 1, 141 - Years 1980-2003
Part: Side window

In order to replace the gaskets of the rear compass windows of the car it is necessary to proceed as follows: it is advisable to put paper tape all around the glass to avoid scratches on the bodywork. First remove the fixing screw of the lower hinge and then remove the three fixing screws of the rear opening handle, finally remove the fixing screw of the upper hinge, at this point we can remove the glass. Clean the glass thoroughly, removing the residues of the gasket, mark the end and start point of the gasket on the paper tape. Begin to lay the new gasket on the profile starting from the point marked previously, making sure that it adheres perfectly, especially in the corners. At the end of the placement, we are going to cut off the excess part and complete the placement. Finally, we take the glass again to reassemble it.

Posted on 15 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the side glass of the Fiat Panda
Replacement of the side glass of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will see the instructions that will allow us to disassemble and replace the side glass of the front door of the Fiat Panda. First, we open t…
How to Replace the Door Seal on a Fiat Panda
How to Replace the Door Seal on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, I will show you how to remove the door seal on your Fiat Panda. This operation is not difficult; just put in a bit of effort and you w…
Fiat Panda rear wiper blade replacement
Fiat Panda rear wiper blade replacement
Fiat Panda (2012-2024 / MK 3, 319) In this video we will see how to replace the rear wiper blade of the Fiat Panda 312. To do so, let's go and lift the blade from the rear window: the …

Other guides you may be interested in

How to Remove the Driver's Door Panel on a Fiat 600

How to remove the driver's door panel on a Fiat 600? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a screwdriver to unscrew the fastening pins on the handle located on the door panel, and unscrew the pins in the plastic of the door opening lever. Remove the handle from the door panel, then use a lever to detach the upper trim panel. Detach the glove compartment panel at the bottom of the door with the lever. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos