Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
141, MK 1
- Years 1980-2003 As we can see in this tutorial, replacing the rear bumper in the Fiat Panda is an extremely simple and fast operation. To do this, we will only need a 13mm wrench. It is fixed to the bodywork by means of four nuts, two on the side, behind the wheel arches, and the remaining two on the rear. To remove the bumper it will therefore be sufficient to unscrew each nut with the 13 wrench, without having to lift the car on a bridge or with a jack. In the same way, fitting the spare part will be just as simple, it will be enough to follow the reverse procedure.
Posted on 5 May 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you replace the battery of the BMW R 1250 GS?In order to replace the battery of the BMW R 1250 GS it is necessary to loosen the bolts that secure the casing positioned on the left side of the bike, so that its cover can be removed. Once this has been removed, you will be able to access the components below, including the battery. The latter must be removed from its housing by disconnecting the power cables and unscrewing the appropriate fixing bolts. In this way it will be possible to insert a new battery, properly fixing it and connecting it to the relative cables, covering everything with the casing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |