Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard and Install the Glove Box

Model: Fiat Sedici MK 1 - Years 2005-2014
Part: Dashboard

If you need to install a new glove box or replace a dashboard panel, follow this guide.
You will need thin plastic spacers and a small spatula or a blunt knife as shown in the video.
Insert the spatula between the silver part and the plastic to create a gap where you will insert the spacers. As you move upwards, continue to pry the metal piece away and insert the spacers.
Once all the clips have popped, pull the side panel towards you and remove it. Repeat the same operation on the other side, and once removed, you can access the lower compartment and replace it with a larger one that has a lid.

Updated on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cabin Air Filter Replacement
Cabin Air Filter Replacement
Fiat Sedici (2005-2014 / MK 1) The cabin air filter is located on the passenger side, behind the glove compartment. To reach the air duct, open the door from the glove compartment …
How to replace the glove compartment of the Fiat Sedici
How to replace the glove compartment of the Fiat Sedici
Fiat Sedici (2005-2014 / MK 1) As a first operation it will obviously be necessary to open the door of the glove compartment to be able to extract the drawer, in this way you will …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Fiat Sedici (2005-2014 / MK 1) The cabin air filter is located on the passenger side, behind the glove compartment: open the glove box, unclip the side stop, and press the sides to…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos