Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Lights on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Fog lights

In this video tutorial, you will see how to remove and replace the front fog lights on a Fiat Bravo, following the instructions below. First, open the bonnet of your car and start removing the front bumper by unscrewing all the screws. Then, remove the plastic cover around the fog light and unscrew the fixing screws of the light found at the back using a 10 mm socket spanner, as shown in the video. At this point, remove and replace the bulb with a new one if necessary; then refit everything!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Light Bulb on a Fiat Bravo
How to Remove the Fog Light Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Replace the fog light bulb on a Fiat Bravo. Here’s how to remove the damaged bulb. Remove the plastic cover at the bottom of the bumper (plastic cap)…
How to Replace and Modify the Front Fog Lights on a Fiat Bravo
How to Replace and Modify the Front Fog Lights on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the front fog light bulb on a Fiat Bravo, start by removing the front bumper. Using a 10mm socket, unscrew the bolts on either side of the…
How to Replace the Fog Light Bulbs on a Fiat Bravo
How to Replace the Fog Light Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) By watching this video tutorial, you will discover how to replace the halogen fog light bulbs with LED ones (H11) on your Fiat Bravo. To make this op…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos