Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace and Modify the Front Fog Lights on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Fog lights

To replace the front fog light bulb on a Fiat Bravo, start by removing the front bumper. Using a 10mm socket, unscrew the bolts on either side of the bumper and the 3 or 4 screws (right and left side). Remove the 2 Torx screws and 1 bolt from underneath the bumper. With the bonnet open, remove the 4 screws above the bumper, then you can detach it by pulling it forward and disconnect the fog light connectors. Now that the bumper is off, to replace the fog lights, unscrew 3 bolts from the fog lights and pull them out to retrieve the bulb. Refit the 2 fog lights by screwing in the 10mm bolts, align the bumper, reconnect the bulb connectors, reattach the side panels, and tighten the bolts. Now you can test the new fog lights.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fog Lights on a Fiat Bravo
How to Replace the Front Fog Lights on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will see how to remove and replace the front fog lights on a Fiat Bravo, following the instructions below. First, open th…
How do you change the language of the on-board computer of the Fiat Bravo?
How do you change the language of the on-board computer of the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) In order to change the language of the on-board computer of the Fiat Bravo, you need to connect a diagnostic tool to the OBD port of the vehicle: thi…
How to Manually Change the Time on the Fiat Bravo
How to Manually Change the Time on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this mini guide for your Fiat Bravo second series (year 2007-2014), discover how to manually change the time displayed on the instrument cluster. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos