Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb on the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Fog lights

To replace the fog light bulb on the Fiat Bravo, access the interior of the front bumper where the internal connector of the headlight assembly is located. Once this connector is disconnected, you can pull out the bulb inside it to replace it with a new spare part. The new bulb must be connected to the corresponding connector and then inserted back into the headlight assembly; turn on the lights to check that everything works correctly.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Light Bulb on a Fiat Bravo
How to Remove the Fog Light Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Replace the fog light bulb on a Fiat Bravo. Here’s how to remove the damaged bulb. Remove the plastic cover at the bottom of the bumper (plastic cap)…
How to Replace and Modify the Front Fog Lights on a Fiat Bravo
How to Replace and Modify the Front Fog Lights on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the front fog light bulb on a Fiat Bravo, start by removing the front bumper. Using a 10mm socket, unscrew the bolts on either side of the…
How to Replace the Headlight Bulb on a Fiat Bravo
How to Replace the Headlight Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the headlight bulb on the Fiat Bravo, open the bonnet to access the rear of the headlight corresponding to the bulb to be removed. Once th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos